| Description |
v, 26 leaves : illustrations ; 28 cm. |
| Summary |
"The General Purpose Automatic Test System was developed for the Air Force as a system to automatically test and fault isolate an electronic unit under test. The Test System is a building block concept and this paper developed the hardware and programming software necessary to integrate an oscilloscope into the system. A Tektronix Type 564 oscilloscope with a Tektronix Type 3A5 Programmable Amplifier and a Tektronix Type 3B5 Programmable Time Base was used. A prototype of the digital and analog interface between the Test System and the Tektronix System was built and demonstrated. The Oscilloscope Building Block displays waveforms only and requires manual intervention in the automatic test program to interpret the presented data"--Abstract, leaf ii. |
|