Theses/Dissertations
Author Reckinger, Arthur P., 1939-

Title Construction of a laboratory type, convertable [sic] excitation argon laser / by Arthur P. Reckinger.

Published 1967.
LOCATION CALL # STATUS
 MST DEPOSITORY  THESIS T 2049 c.2  NOT CHECKED OUT
 MST DEPOSITORY  THESIS T 2049    NOT CHECKED OUT
Description v, 66 leaves : illustrations ; 28 cm
Summary "The purpose of this thesis is to describe the construction of a general purpose, convertable [sic] excitation, laboratory type, argon laser. Quartz tubing was used in the final model while attempts to use alumina were made during earlier work. The final model has total optical power output of 230 mw at a discharge current of 29 amperes in the dc excitation mode. Provision was also made to utilize RF or pulsed excitation. The device is built so that several values of optical transmittance are available with a wide range of mirror placement"--Abstract, leaf ii.
Notes M.S. University of Missouri at Rolla 1967.
Vita.
Includes bibliographical references (leaves 62-65).
Subjects Argon lasers -- Design and construction.
Electronic excitation.
Other Titles Construction of a laboratory type, convertible excitation argon laser.
MST thesis. Electrical Engineering (M.S., 1967).
OCLC/WorldCat Number 5988170
Author Reckinger, Arthur P., 1939-
Title Construction of a laboratory type, convertable [sic] excitation argon laser / by Arthur P. Reckinger.
Subjects Argon lasers -- Design and construction.
Electronic excitation.
Other Titles Construction of a laboratory type, convertible excitation argon laser.
MST thesis. Electrical Engineering (M.S., 1967).