Add to My Lists Save to Folder MARC Display Another Search Search
MOBIUS
     
Theses/Dissertations
Author Oteka, Anthony Onochie, 1972-

Title Finite element simulation and experimental investigation of residual stresses, cutting forces and surface roughness in orthogonal turning of titanium alloy / by Anthonly Onochie Oteka.

Published ©2005.
LOCATION CALL # STATUS
 MST DEPOSITORY  THESIS T 8857/8880  MICROFILM    NOT CHECKED OUT
 MST Thesis  THESIS T 8879    NOT CHECKED OUT
Description x, 102 leaves : illustrations ; 28 cm.
Summary "This research work presents the results of finite element simulation and experimental investigation of residual stresses, cutting forces and surface roughness in orthogonal turning of titanium alloy. The Simulation of residual stresses, cutting forces and temperature in orthogonal turning of titanium alloy were conducted with the AdvantEdge metal cutting modeling software. Results from this study indicates that the circumferential residual stresses analysis for all cases of varying the cutting speed and feedrate were observed to tend towards compressive residual stress as the depth from the workpiece surface increases while surface residual stresses were predicted to be tensile. Cutting forces in Y-direction were observed to be greater than the feed forces in the X-direction"--Abstract, leaf iv.
Notes Vita.
Includes bibliographical references.
M.S. University of Missouri--Rolla 2005.
Subjects Finite element method.
Titanium alloys.
Metal-cutting.
Residual stresses.
Materials -- Compression testing.
Taguchi methods (Quality control)
Other Titles MST thesis. Mechanical Engineering (M.S., 2006).
Finite element simulation of residual stresses, cutting forces and temperature in orthogonal turning of titanium alloy.
Investigation of effects of cutting process parameters on residual stresses, cutting forces and surface roughness in orthogonal turning of titanium alloy using Taguchi method.
OCLC/WorldCat Number 70684138
Permanent Link
http://merlin.lib.umsystem.edu:80/record=b5593898~S5